|
Randy Ayers Nascar Modeling Forums
|
View previous topic :: View next topic |
Author |
Message |
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Mon Feb 19, 2018 1:09 am Post subject: #2 Miller Lite 2014 |
|
|
this will be a WiP "in progress", I have the motor done. wheels and tires are started, will be shown next.
decals from Mike's modern engine goodies sheet, tried to put on a seemingly microscopic "Holly EFI" decal onto the front of the fuel injector bowl, but I lost the decal while trying to apply it! man it was small.
more to come soon... _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
james p
Joined: 16 Feb 2018 Posts: 211 Location: Lakeland FL via Cassopolis MI
|
Posted: Tue Feb 20, 2018 7:47 pm Post subject: |
|
|
Keep the photos coming. great work on the engine so far. |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Wed Feb 21, 2018 10:49 am Post subject: a tad bit more progress |
|
|
got the wheels and tires mostly done, just need to add the fluorescent tape guides
body is painted with 3 coats of MCW Fleet White, not glossed yet because I have to wait for the weather to cooperate so I can spray the blue. and for reference, I decided to go with MCW Dark Blue (ie. Stroh's blue) for the blue, even though they recommend Racing Blue (think Sunoco) on their color application chart. sprayed both on plastic and the dark blue matches the blue on the decal sheet better.
hood is painted, glossed, rubbed with Buff-Ez, and decaled
chassis work is next, have to decide what manner I will lower the stance. pretty sure I will cut the rear springs down just a bit and try to drill some new holes in the front suspension to mount the front wheels. _________________ ON DECK/IN THE WORKS: too many started to list...
Last edited by 18degrees on Thu Feb 22, 2018 9:39 am; edited 1 time in total |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Thu Feb 22, 2018 9:38 am Post subject: wheels and tires are done |
|
|
all details from Mike's tire goodies sheet _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Mon Feb 26, 2018 6:29 pm Post subject: more paint finished |
|
|
added the blue along the bottom of the car, 3 coats of MCW Dark Blue, found that to be closer to the blue on the decal sheet. also 3 coats of MCW lacquer clear. will be rubbed out with Buff-Ez here in a few days, and the decals will be started.
_________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Mon Mar 05, 2018 2:51 am Post subject: chassis almost done and a bit into the decals |
|
|
been at this off and on for about 6 hours tonight... lordy...
chassis only needs the front wheels attached. rear was lowered via cutting the springs down, the wheels need to be pulled in under the body a bit, that will happen next build...
tail light decals are a bit wrinkly towards the top, basted them with some Micro-Sol, hopefully they lay down. the black decal that stretches from the A pillar to the B pillar didn't fit, I assume that since these are the 2014 decals and this is a new glue kit, that's why they didn't fit. hopefully the new Danica #10 kits I ordered for other builds will have them. all the headlights, grilles, and tail lights are from the Harvick kit sheet, the rest are Powerslide.
_________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
bigryan18
Joined: 29 Jan 2018 Posts: 190
|
Posted: Mon Mar 05, 2018 10:06 pm Post subject: |
|
|
Your headlight decals are on wrong, the amber parts should be facing the wheel wells. They're also reversed as the one on the the should be on the right side.. |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Tue Mar 06, 2018 12:02 am Post subject: |
|
|
bigryan18 wrote: | Your headlight decals are on wrong, the amber parts should be facing the wheel wells. They're also reversed as the one on the the should be on the right side.. |
Well ain’t that some stuff... thanks for the heads up. Will correct that when i get my Danica kits. They seemed to fit so well... _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
Scotty
Joined: 29 Jan 2018 Posts: 107
|
Posted: Wed Mar 07, 2018 8:35 am Post subject: |
|
|
not trying to be picky, but straight curiosity. Why exactly are you building the '14 version car on a '17 body style? im confused.... |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Wed Mar 07, 2018 10:02 am Post subject: |
|
|
Scotty wrote: | not trying to be picky, but straight curiosity. Why exactly are you building the '14 version car on a '17 body style? im confused.... |
1. Not fond of the snap kits
2. Powerslide didn’t make a decal sheet besides the ‘14 sheet
3. Have had the kit in my closet since it came out and couldn’t find anything i wanted to build it with.
4. Most importantly, because i can.
Good enough? _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
Scotty
Joined: 29 Jan 2018 Posts: 107
|
Posted: Wed Mar 07, 2018 11:14 am Post subject: |
|
|
Good enough? Do I sense some hostility on the opposite end of the keyboard? I was just asking. If you were being funny, then next time add a LOL or smiley. I do sarcasm and smart ass except when I'm legitimately asking a question.
1st, I don't know how long you have been doing this, (for me 30 years) but I went out of my way to give you the paint info that YOU requested from all of us at this board ( I like to help, especially new guys) only to tell us thanks but I'm going this way. Why bother asking if you are not going to take the advice.
2nd, How do you manage to put headlamp decals on backwards with all the reference photos you smothered the board with in the paint section?
3rd, Ill give you more advice, Ronnie at SMH hobbies has a resin fusion front clip piece you can splice in on a 17 Fusion kit so you can backdate to the correct year.
Now....is this good enough? |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Wed Mar 07, 2018 11:53 am Post subject: |
|
|
Scotty wrote: | Good enough? Do I sense some hostility on the opposite end of the keyboard? I was just asking. If you were being funny, then next time add a LOL or smiley. I do sarcasm and smart ass except when I'm legitimately asking a question.
1st, I don't know how long you have been doing this, (for me 30 years) but I went out of my way to give you the paint info that YOU requested from all of us at this board ( I like to help, especially new guys) only to tell us thanks but I'm going this way. Why bother asking if you are not going to take the advice.
2nd, How do you manage to put headlamp decals on backwards with all the reference photos you smothered the board with in the paint section?
3rd, Ill give you more advice, Ronnie at SMH hobbies has a resin fusion front clip piece you can splice in on a 17 Fusion kit so you can backdate to the correct year.
Now....is this good enough? |
hmm... do I sense a bit of sarcasm on your end of the keyboard?
may I retort?
1. I did follow your advice about the paint, going with dark blue, as you suggested. didn't say that I was "going this way" against your advice on paint, specifically. I just used a different brand of paint besides Tamiya. I even used your suggested spoon method of testing paints. so it would seem i took all your advice... so i have no idea what this point is about on your end.
2. I just carelessly slapped them on without consulting the reference photos that I "smothered to board with" (I think it was 3 pics).
3. thanks, but I am not going to cut the front clip off a nearly finished model. I do love accuracy when it comes to making models, but I am pretty happy with how it turned out. plus, most of the folks who will see this completed model wouldn't be able to tell the difference between a '14 Fusion and a '17 Fusion.
there, that should be good enough. let's end this here, huh? _________________ ON DECK/IN THE WORKS: too many started to list...
Last edited by 18degrees on Wed Mar 07, 2018 11:59 am; edited 1 time in total |
|
Back to top |
|
|
18degrees
Joined: 01 Feb 2018 Posts: 1019 Location: metro STL area, ILLINois
|
Posted: Wed Mar 07, 2018 11:56 am Post subject: a bit more done... |
|
|
...with corrected headlight decals, none the less!
with the build being so close to completion, this will be my last post about it until the Showroom _________________ ON DECK/IN THE WORKS: too many started to list...
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|